PAM-粉煤灰体系在煤泥水絮凝沉降过程中的作用及机理

以煤泥水COD、SS、动电位、污泥比阻为切入点,分析了煤泥水的特点及难以絮凝沉降的原因,并研究了PAM-粉煤灰体系在混凝沉降作用中的机理。研究结果表明:PAM-粉煤灰法在最优条件下,清水分离率47%、沉降速度0.357 mm/s;上清液:pH=7.35,SS=55.57 mg/L,COD=37.72 mg/L;污泥比阻为0.062×10^15 m/kg,满足煤泥水循环标准。     

Olfactory responses of Stegobium paniceum to different Chinese medicinal plant materials and component analysis of volatiles

Stegobium paniceum (L.) (Coleoptera: Anobiidae) is among the major pests of stored products, causing great damage to stored Chinese medicinal plant materials (CMPMs) in China. Effective control strategies are urgently needed. The aim of this study was to explore the role of volatile organic compounds in the host preference of S. paniceum. First, the olfactory behavioral responses of S. paniceum adults to volatiles from four CMPMs (Panax notoginseng, Angelica sinensis, Gastrodia elata, and Peucedanum praeruptorum) were tested in Y-tube olfactometer experiments. Then, the volatile composition of these plant materials were analyzed by gas chromatography-mass spectrometry (GC-MS). S. paniceum showed significant preferences for volatiles from the four CMPMs, compared with clean air (CA). When S. paniceum was presented with choices among different CMPMs, it showed the strongest preference for P. notoginseng, followed by A. sinensis, then G. elata, and P. praeruptorum. GC-MS analysis identified 43, 34, 28 and 60 components in the volatile profiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. Falcarinol (14.4%), 3-n-butyl phthalide (78.7%), p-cresol (40.1%), and β-pinene (29.1%) were the most abundant components of the volatiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. The olfactory responses of S. paniceum to the four CMPMs demonstrated that host-related volatiles play an important role in the host-searching process by adult beetles. This information will be useful for the development of safe and effective trapping strategies for this pest.     

抽水蓄能电站施工现场安全文明施工三维策划应用研究

基于电网安全对稳定经济运行的重要作用,国家大力推进抽水蓄能电站的建设,"十三五"期间,将进入抽水蓄能电站建设高峰期,抽水蓄能电站施工现场点多面广,基建安全形势严峻,施工现场的安全是工程管理的核心因素[1].为了提升现场安全文明施工管理水平,其核心在于施工现场安全文明施工策划,策划的水平和可操作性决定了建筑施工过程中的安全管理的成效,而行之有效的策划应用模式成为关键.本文结合山东文登抽水蓄能电站安全文明施工三维策划管理及三维策划系统应用,解决了现有安全文明施工策划、现场安全布置、安全设施标准化等环节的局限性及不足,实现了策划的高效快捷、效果直观真切,探索出了安全文明施工策划应用的新途径.     

Microstructure characterization of W-Ni-Fe heavy alloys with optimized metallographic preparation method

Tungsten heavy alloys (WHA) have been widely adopted in many engineering applications due to their excellent physicochemical properties. Microstructure characterization is a very powerful method ranging from testing materials properties to detecting material failures and defects. However, the microstructure of WHA was not well characterized with the sample prepared by conventional method of etching with strong acids, bases or oxidant after polishing for the coarse surface. To solve the problem, the exact characterization of W-Ni-Fe heavy alloys microstructure was conducted using the sample prepared by optimized polishing method. A series of experiments were conducted to find the suitable polishing conditions including polishing pad, abrasive slurry and slurry pH. The results show that a smooth and clear microstructure sample was obtained by polishing with alkaline colloidal silica and IC polishing pad, which contained few defects compared with that obtained by conventional method of etching after polishing. The microstructure of W-Ni-Fe heavy alloys was analyzed by XRD, EDS tests and EPMA detection. The slipping phenomenon was observed in nanoindentation test using the prepared sample for the first time and the mechanism of satisfactory microstructure sample preparation was illustrated.     

Viscoplastic behavior of AA7075 aluminum alloy at high strain rate

Journal of Mechanical Science and Technology - The flow stress increases with the increase in strain rate. This phenomenon is the strain rate effect of plastic deformation. Hopkinson experiment...     

Design and optimization of the magnetic adsorption mechanism of a pipeline-climbing robot

Journal of Mechanical Science and Technology - This study has designed a type of pipeline-climbing robot to solve the problem in which the corrosion of offshore oil pipelines and the adhesion of...     

NBTI alleviation on FinFET-made GPUs by utilizing device heterogeneity

Recent experimental studies reveal that FinFET devices commercialized in recent years tend to suffer from more severe NBTI degradation compared to planar transistors, necessitating effective techniques on processors built with FinFET for endurable operations. We propose to address this problem by exploiting the device heterogeneity and leveraging the slower NBTI aging rate manifested on the planar devices. We focus on modern graphics processing units in this study due to their wide usage in the current community. We validate the effectiveness of the technique by applying it to the warp scheduler and L2 cache, and demonstrate that NBTI degradation is considerably alleviated with slight performance overhead.     

A physically-based model for global collision avoidance in 5-axis point milling

Although 5-axis free form surface machining is commonly proposed in CAD/CAM software, several issues still need to be addressed and especially collision avoidance between the tool and the part. Indeed, advanced user skills are often required to define smooth tool axis orientations along the tool path in high speed machining. In the literature, the problem of collision avoidance is mainly treated as an iterative process based on local and global collision tests with a geometrical method. In this paper, an innovative method based on physical modeling is used to generate 5-axis collision-free smooth tool paths. In the proposed approach, the ball-end tool is considered as a rigid body moving in the 3D space on which repulsive forces, deriving from a scalar potential field attached to the check surfaces, and attractive forces are acting. A study of the check surface tessellation is carried out to ensure smooth variations of the tool axis orientation. The proposed algorithm is applied to open pocket parts such as an impeller to emphasize the effectiveness of this method to avoid collision.     

Robust skin detection in real-world images

Human skin detection in images is desirable in many practical applications, e.g., human–computer interaction and adult-content filtering. However, existing methods are mainly suffer from confusing backgrounds in real-world images. In this paper, we try to address this issue by exploring and combining several human skin properties, i.e. color property, texture property and region property. First, images are divided into superpixels, and robust skin seeds and background seeds are acquired through color property and texture property of skin. Then we combining color, region and texture properties of skin by proposing a novel skin color and texture based graph cuts (SCTGC) to acquire the final skin detection results. Comprehensive and comparative experiments show that the proposed method achieves promising performance and outperforms many state-of-the-art methods over publicly available challenging datasets with a great part of hard images.